inDART-One

In-Circuit Debugger/Programmer for Freescale HC08/S08/RS08/S12/S12X Families

• Universal: supports Freescale HC08/S08/RS08/S12/S12X through MON08 and BDM interfaces--future ready for new devices and families.

• Gangable: up to 32 instruments controllable from the same PC.

• Fast: fast HC08 programming algorithms drastically reduce production times (typically around 1 second for 32 KB Flash).

• Flexible: seamlessly integrates with CodeWarrior development tools. Dedicated programming interfaces. User-driven through DLL Programming Library.

The inDART-One In-Circuit Debugger/Programmer is a powerful debugging and programming tool for Freescale HC08-, S08-, RS08-, S12- and S12X-based systems.

inDART-One takes advantage of the CodeWarrior Development Studio Special Edition (which groups an Editor, Assembler, C Compiler and Debugger) and the Freescale MON08 and BDM interfaces, which allow the download and debug of the user application into the target microcontroller’s FLASH memory. Together with CodeWarrior, inDART-One provides you with everything you need to write, compile, download, in-circuit emulate and debug user code. Full-speed program execution allows you to perform hardware and software testing in real time. inDART-One is connected to the host PC through a USB port.

inDART-One comes with CodeWarrior Development Studio Special Edition. CodeWarrior Development Studio is a powerful and easy-to-use tool suite designed to increase your software development productivity. Its Integrated Development Environment (IDE) provides unrivaled features such as Processor Expert application design tool, full chip simulation, Data Visualization and project manager with templates to help you concentrate on the added value of your application.

inDART-One (S08, S12 and S12X families) is also supported by the NoICE debugger (http://www.noicedebugger.com). S12 support is present on the IAR Embedded Workbench (http://www.iar.com).

inDART-One is a full-featured programmer, thanks to the provided DataBlaze programming utility. Additionally, up to 32 inDART-One instruments can be connected (using USB hubs) to the same PC, allowing for multiple (gang) programming sessions. A specific multiple programming utility, MultiBlaze, is provided.

Fast HC08 programming algorithms reduce significantly the amount of time needed to program HC08 devices. Fast programming algorithms can be used both in single and multiple programming. The table below shows fast programming times for some HC08 devices.

Device	Mem Size	Programming Times
MC68HC908GP32	32KB fCPU=4MHz	Program = 1.5s Program + Verify = 2.9s
MC68HC908QB8	8KB fCPU=4MHz	Program = 1.1s Program + Trim + Verify = 1.5s
MC68HC908AZ60A	60KB fCPU=4MHz	Program = 2.7s Program + Verify = 5.4s

Fast programming algorithms are device-specific and must be purchased separately. Please contact us for more information.

inDART-One can be fully controlled via the provided IPL-One Programming Library. The IPL-One Programming Library is a DLL which includes all of the low-level functions that allows you to set up the instrument and perform all of the programming commands and functions of the DataBlaze and MultiBlaze programming utilities from within your own Windows application. The IPL-One Programming Library contains C written routines, and can be used to interface the instrument from within, for example, a Microsoft Visual C or Visual Basic application, as well as any other programming language that supports the DLL mechanism.

inDART-One can be used as an in-circuit programmer for small productions. However, for larger productions, ATE integration and/or extreme performance, we suggest to use FlashRunner.